Talaris 4.5F

What is the maximum number of applications allowed per year for cucurbit crops?

• 4 applications
• 5 applications ✓
• 10 applications
• No limit if rotated with other fungicides

Answer: The restrictions section states: 'Do not apply more than 5 applications per year for cucurbits.'

What is the Re-entry Interval (REI) for most crops treated with Talaris 4.5F, and what is the specific REI for beans?

• 12 hours for most crops; 14 days for beans ✓
• 24 hours for most crops; 48 hours for beans
• 12 hours for most crops; 24 hours for beans
• 48 hours for most crops; 7 days for beans

Answer: The label states the REI is 12 hours for most crops, except beans where it is 14 days.

To prevent product degradation, which of the following should NOT be mixed in the tank with Talaris 4.5F?

• Highly alkaline pesticides like lime sulfur ✓
• Drip irrigation water
• Non-alkaline surfactants
• Water for garlic clove suspension

Answer: The label warns not to mix with copper-containing materials or highly alkaline pesticides like Bordeaux mixture or lime sulfur to avoid degradation.

Which of the following is a required piece of Personal Protective Equipment (PPE) for mixers, loaders, and applicators using Talaris 4.5F?

• N95 Respirator
• Chemical-resistant apron ✓
• Face shield
• Safety goggles

Answer: The PPE section specifically lists a 'Chemical-resistant apron (for mixers, loaders, and applicators)'.

When applying Talaris 4.5F to beans to control Anthracnose, Gray Mold, or White Mold, when should the application be timed?

• Exactly 35 days after planting
• When 100% of plants have at least one open bloom ✓
• During the first 14 days of the growth cycle
• Only when wind speeds are below 5 miles per hour

Answer: The label states that for certain crops like beans, applications should be timed when 100% of plants have at least one open bloom.

Under what weather condition must application be avoided?

• When wind speeds exceed 10 miles per hour ✓
• When temperatures are above 90 degrees
• When humidity is below 20%
• When rain is expected within 24 hours

Answer: The timing/weather section states: 'Do not apply if wind speeds exceed 10 miles per hour at the application site.'

Which of the following pests is Talaris 4.5F used to control in peanut crops?

• Anthracnose and White Mold
• Early Leaf Spot, Rust, and Web Blotch ✓
• Penicillium Clove Rot
• Cephaloosporium and Belly Rot

Answer: According to the label, peanuts are treated for Early Leaf Spot, Late Leaf Spot, Leaf Spot, Lim Rot, Rust, and Web Blotch.

What is the correct method for treating garlic cloves with Talaris 4.5F prior to planting?

• Spray a 10 fl. oz. per acre solution on the cloves
• Apply via drip irrigation to the root zone
• Immerse cloves in a suspension of 20 fl. oz. per 100 gallons of water for at least five minutes ✓
• Broadcast 40 fl. oz. per acre over the garlic field

Answer: For garlic cloves, the label requires making a suspension of 20 fl. oz. per 100 gallons of water and immersing cloves for no less than five minutes.