Talak 7 9 F Insecticide

When applying Talak 7.9% F to the trunks of trees to control Carpenter Ants, how should the product be applied?

• As a broadcast spray on the leaves
• As a 0.06% dilution injected into the center
• As a dilution to wet the bark from the base as high as possible ✓
• As a high volume application on porous surfaces

Answer: The label notes for tree trunks states: 'apply this dilution to wet the bark from the base of the tree to as high as possible on the trunk.'

🔗 Source

When combining liquid Talak 7.9% F treatments with bait treatments for Carpenter Ants, how should the baits be applied?

• Mix the bait directly into the Talak 7.9% F dilution
• Apply baits only in areas where Talak 7.9% F has not been applied ✓
• Apply baits as a broadcast treatment over the liquid spray
• Apply baits only to the tree trunks

Answer: The label notes state: 'When combining liquid Talak 7.9% F treatments with bait treatments... apply baits in those areas where Talak 7.9% F has not been applied.'

🔗 Source

What is the application rate for Carpenter Ants on outdoor non-porous surfaces?

• One gallon of dilution per 1,000 square feet
• 0.5 fluid oz. per 1,000 square feet
• One gallon per 1,000 square feet ✓
• High volume application per 1,000 square feet

Answer: For outdoor non-porous surfaces, the rate is listed as one gallon per 1,000 square feet.

🔗 Source

When treating Carpenter Ants indoors, what is the recommended dilution rate per gallon of water?

• 0.06 to 0.1 fluid oz.
• 1.0 to 2.0 fluid oz.
• 0.5 to 1.0 fluid oz. ✓
• 5.0 to 10.0 fluid oz.

Answer: For indoor Carpenter Ant treatments, the dilution is 0.5 to 1.0 fluid oz. of Talak 7.9% F per gallon of water.

🔗 Source

To achieve a 0.06% dilution for treating Carpenter Ants inside utility poles or fencing, how much Talak 7.9% F should be mixed per gallon of water?

• 0.5 fluid oz.
• 1.0 fluid oz. ✓
• 0.06 fluid oz.
• 1.5 fluid oz.

Answer: The label states a 0.06% dilution is achieved using 1.0 fl. oz. of Talak 7.9% F per gallon of water for inside trees, utility poles, etc.

🔗 Source

When treating Carpenter Ants indoors, which of the following is a prohibited application method in residential areas?

• Spot treatment in corners
• Crack and crevice treatment
• Broadcast or general surface treatment ✓
• Foam treatment in voids

Answer: The label explicitly states: 'Do not apply as a broadcast or general surface treatment in residential areas.'

🔗 Source

If a technician is treating termite carton nests in building voids, what is the required dilution and application method?

• 0.5 fl. oz. per gallon as a coarse fan spray
• 1.0 fl. oz. per gallon as a liquid or foam using a pointed injection tool ✓
• 1.0 fl. oz. per 1,000 sq. ft. as a broadcast spray
• 0.06 fl. oz. per gallon as a spot treatment

Answer: For termite carton nests, the label specifies 1.0 fluid oz. of Talak 7.9% F per gallon of water applied as a liquid or foam using a pointed injection tool.

🔗 Source

What is the required dilution rate for treating winged reproductive or exposed worker termites in attics and crawl spaces?

• 0.5 fluid oz. per gallon of water
• 1.0 fluid ounce per gallon of water ✓
• 0.06 fluid oz. per gallon of water
• 1.0 fluid oz. per 1,000 square feet

Answer: For termites (winged reproductive or exposed workers), the mixing instructions specify 1.0 fluid ounce of Talak 7.9% F per gallon of water.

🔗 Source