SPECTICLE TOTAL

When applying SPECTICLE TOTAL to non-crop areas, what is the recommended mixing rate per gallon of water?

• 8 fl oz per 1 gal of water
• 16 fl oz per 1 gal of water ✓
• 32 fl oz per 1 gal of water
• 64 fl oz per 1 gal of water

Answer: The label specifies: 'Add 16 fl oz per 1 gallon of water' and 'rate: 16 fl oz; unit: per 1 gal of water; dilution: 16 fl oz per 1 gal of water'.

🔗 Source

To avoid drift onto desirable plants, what wind condition should be avoided during application?

• High winds
• Calm air ✓
• Heavy rain
• Extreme heat

Answer: The label states: 'Do not apply when the air is calm to avoid drift onto desirable plants'.

🔗 Source

What is the required first aid procedure if the product makes contact with the eyes?

• Rinse immediately for 5-10 minutes
• Call a doctor immediately without rinsing
• Hold eye open and rinse slowly and gently with water for 15 to 20 minutes ✓
• Wash eyes with soap and water for 30 minutes

Answer: The label states: 'If eyes contact occurs, hold eye open and rinse slowly and gently with water for 15 to 20 minutes.'

🔗 Source

Which piece of equipment is permitted for use when applying this product with a spray gun?

• Plastic spray gun
• Any standard spray gun
• Stainless steel spray gun ✓
• Copper spray gun

Answer: The label states: 'Do not apply using a spray gun, except stainless steel'.

🔗 Source

Under what temperature condition are best results achieved when using this product?

• When temperatures are below 32 ° F
• When temperatures are exactly 60 ° F
• When temperatures are above 60 ° F ✓
• When temperatures are between 40 and 50 ° F

Answer: The label states: 'Best results will be achieved when temperatures are above 60 ° F'.

🔗 Source

Which of the following is a stated restriction regarding post-application care?

• Do not rinse or water for 60 minutes after application
• Do not allow pets to enter the area for 24 hours
• Do not rinse or water 30 minutes after application ✓
• Do not water the area until 6 months have passed

Answer: The label states: 'Do not rinse or water 30 minutes after application'.

🔗 Source

What restriction is placed on application near ornamental plants and landscaping?

• Do not use within 12 months of planting new vegetation
• Do not use in areas where young plants, trees, shrubs, or sod will be planted within 6 months ✓
• Do not use in areas where young plants, trees, shrubs, or sod will be planted within 1 month
• Do not use in landscaped areas containing only annuals

Answer: The label states: 'Do not use in or around vegetable gardens or in landscaped areas where young plants (annuals and/or perennials), trees, shrubs, and sod will soon be planted within 6 months after treatment'.

🔗 Source

What is the maximum annual application rate for this product?

• 16 fl oz per 1000 sq ft
• 32 fl oz per 1000 sq ft ✓
• 48 fl oz per 1000 sq ft
• 64 fl oz per 1000 sq ft

Answer: The label states: 'Do not apply more than a maximum of 32 fl oz/ 1000 sq ft per year'.

🔗 Source