Sevin Insect Killer Dust

When treating insects harbored in voids and cracks-and-crevices around the outside foundation wall of a home, what is the recommended application rate?

• 8 ounces to lightly dust a band 3 to 4 inches wide ✓
• 4.5 pounds per 1000 ft2
• A thin uniform layer over the entire foundation
• 2 ounces per foot of foundation

Answer: The label states to lightly dust a band 3 to 4 inches wide around the outside foundation wall using 8 ounces.

🔗 Source

What is the required Personal Protective Equipment (PPE) for this product?

• Chemical resistant goggles
• N95 respirator
• Wearing household latex or rubber gloves ✓
• Full body Tyvek suit

Answer: The PPE section specifies wearing household latex or rubber gloves.

🔗 Source

When applying to Grapes, what is the recommended timing relative to harvest?

• Apply 10 days before harvest
• Apply 3 weeks before harvest and repeat 10 days later if necessary ✓
• Apply only after harvest is complete
• Apply 1 week before harvest

Answer: The label notes for Grapes state to apply 3 weeks before harvest and repeat 10 days later if necessary.

🔗 Source

When applying the product to grass, how should the dust be applied?

• As a heavy band 3 to 4 inches wide
• As a thin uniform layer of dust ✓
• By spraying into fish pools and ponds
• Only in spot treatments not exceeding 2 square feet

Answer: For grass applications, the label instructs to sprinkle a thin uniform layer of dust on grass.

🔗 Source

What is the Pre-Harvest Interval (PHI) for potatoes when using this product?

• 3 days
• 4 days
• 7 days ✓
• 14 days

Answer: The label specifies a 7-day PHI for potatoes.

🔗 Source

If performing a spot treatment with Sevin Insect Killer Dust, what is the maximum allowable size for that treatment?

• 3 to 4 inches wide
• 4.5 square feet
• 2 square feet ✓
• 25 square feet

Answer: The label states that spot treatments must not exceed two square feet in size.

🔗 Source

Regarding blooming plants, which of the following is a restriction for Sevin Insect Killer Dust?

• Do not apply or allow it to drift to blooming plants or weeds
• Do not make more than 5 applications after bloom
• Do not make more than 2 applications after bloom
• All of the above ✓

Answer: The label prohibits drift to blooming plants/weeds and specifies limits on applications after bloom (noting both 2 and 5 in different restriction contexts).

🔗 Source

What is the minimum required interval between applications of this product?

• At weekly intervals
• At least 2 weeks apart
• At least 7 days apart ✓
• At least 25 feet apart

Answer: The restrictions state: 'Do not make applications less than 7 days apart.'

🔗 Source