Recon Bold SL

If applying ReCon Bold SL to Alfalfa via soil-incorporated or soil-applied methods, what is the Restricted-Entry Interval (REI)?

• 0 hours ✓
• 12 hours
• 24 hours
• 60 days

Answer: The REI section states: REI: 0 hours for soil-incorporated or soil-applied applications.

🔗 Source

What is the maximum single application rate of ReCon Bold SL for Avocados?

• 2.0 pt/A
• 3.6 pt/A
• 4.0 pt/A ✓
• 6.0 lb ai/year

Answer: Under Use restrictions: Maximum Single Application Rate: 4.0 pt/A (equivalent to 2.0 lb ai/A mefenoxam) for Avocados.

🔗 Source

What is the required Personal Protective Equipment (PPE) regarding hand protection for this product?

• Nitrile rubber ≥ 15 mils
• Butyl rubber ≥ 14 mils, nitrile rubber ≥ 15 mils, neoprene rubber ≥ 14 mils, polyvinyl chloride (PVC) ≥ 14 mils, or Viton® ≥ 14 mils ✓
• Chemical-resistant gloves made of barrier laminate or nitrile rubber ≥ 15 mils
• Any chemical-resistant gloves provided by the manufacturer

Answer: The PPE section states: Wear... chemical-resistant gloves made of barrier laminate, butyl rubber ≥ 14 mils, nitrile rubber ≥ 15 mils, neoprene rubber ≥ 14 mils, or polyvinyl chloride (PVC) ≥ 14 mils, or Viton® ≥ 14 mils.

🔗 Source

For an application of ReCon Bold SL to control Root Rot (Pythium spp.) in blueberries, which application method and rate is listed?

• 0.25 - 0.50 pt/A via broadcast spray at planting
• 1.0 - 2.0 pt/A or 3.6 pt/A per 1,000 rot ft via soil-directed and other foliar applications ✓
• 0.5 - 1.0 pt/A via preplant incorporated or spray broadcast
• 3.6 pt/A via drip irrigation only

Answer: In Application rates and targets: target_pest: Root Rot (Pythium spp.); site: Blueberries; rate: 1.0 - 2.0 pt/A (0.50 - 1.0 lb) or 3.6 pt/A (1.8 lb) per 1,000 rot ft; notes: Soil-directed and other foliar applications; spray broadcast, band or drip.

🔗 Source

According to the label, what must the applicator avoid during application?

• High temperature inversion conditions
• Wind speeds that favor drift beyond the intended area
• Conditions where uniform coverage cannot be obtained
• All of the above ✓

Answer: The Timing and weather conditions section states: Do not spray when wind speeds favor drift beyond the area intended for treatment; Avoid application under conditions when uniform coverage cannot be obtained; Avoid application under conditions when spray drift may occur; Do not apply during high temperature inversion conditions.

🔗 Source

Which of the following is a restriction for Alfalfa following the application of this product?

• Do not harvest crops for 60 days.
• Do not feed green corn or hay out for 60 days after following Alfalfa. ✓
• Do not exceed 1.4 lb ai/year of total mefenoxam products.
• Do not apply during high temperature inversion conditions.

Answer: Under Use restrictions: Do NOT feed green corn or hay out for 60 days after following Alfalfa.

🔗 Source

When mixing ReCon Bold SL in a spray tank, what is the correct order of operations for adding water and product?

• Add the product first, then add all the water.
• Add 1/4 - 1/2 of the required water, add the product with the agitator running, then add the remaining water. ✓
• Add 1/2 of the required water, add the product, then add the remaining water without agitation.
• Add the product to an empty tank, then add all the water with the agitator running.

Answer: According to the Mixing and dilution section: Add 1/4 - 1/2 of the required amount of water to the spray or mixing tank; With the agitator running, add ReCon Bold SL to the tank; Continue agitation while adding the remainder of the water.

🔗 Source

When targeting Damping Off (Pythium spp.) in Carrots using soil-directed or foliar applications, what is the permitted application rate?

• 0.25 - 0.50 pt/A
• 1.0 - 2.0 pt/A
• 0.5 - 1.0 pt/A ✓
• 3.6 pt/A

Answer: In Application rates and targets: target_pest: Damping Off, Cavity Spot, Root Dieback (Pythium spp.); site: Carrots; rate: 0.5 - 1.0 pt/A (0.25 - 0.5 lb); notes: Soil-directed and other foliar applications...

🔗 Source