QNAP 2 COPPER NAPHTHENATE RTU

Which PPE is required when handling or applying this product?

• Chemical-resistant gloves, eye protection, and long-sleeved clothing ✓
• N95 respirator, safety goggles, and rubber boots
• Face shield, heavy-duty apron, and nitrile gloves
• Dust mask, earplugs, and chemical-resistant coveralls

Answer: The label requires chemical-resistant gloves, eye protection, and long-sleeved clothing.

🔗 Source

What is the dilution requirement for QNAP 2 COPPER NAPHTHENATE RTU?

• Ready To Use (RTU) ✓
• Mix 1 part product with 10 parts water
• Dilute with petroleum distillates
• Mix with water until 2% metallic copper is achieved

Answer: The product name and mixing facts indicate it is an RTU (Ready To Use) formulation.

🔗 Source

Under which condition is it prohibited to use this product?

• In the construction of beehives ✓
• On wood that is located below ground
• On end cuts of pressure-treated wood
• On exterior wood applications

Answer: The label explicitly states: 'Do not use in the construction of beehives.'

🔗 Source

Which of the following is a specific use restriction regarding food or agriculture?

• Non-pressure treated wood is not suitable for garden applications where fruit or vegetables will be grown ✓
• Do not use on wood used for outdoor picnic tables
• Do not use on wood that is used for animal enclosures
• Do not use on wood that is used for fruit tree supports

Answer: The label states that non-pressure treated wood is not suitable for garden applications where fruit or vegetables will be grown.

🔗 Source

What is the required application rate for ground contact wood applications?

• 0.04 to 0.05 lbs copper metal/ft² ✓
• 0.17 to 0.20 lbs copper metal/ft²
• 1.0 to 2.0 lbs copper metal/ft²
• 0.02 to 0.04 lbs copper metal/ft²

Answer: For ground contact, the label states it should be applied at a retention of 0.04 to 0.05 lbs copper metal/ft².

🔗 Source

According to the label, where is it prohibited to apply this product?

• Directly to water or areas where surface water is present or intended to be below the high water mark ✓
• On any wood that is located above ground level
• On wood that is used for outdoor furniture
• On pressure-treated wood end cuts

Answer: The label restricts application directly to water or areas where surface water is present or intended to be below the high water mark.

🔗 Source

Which of the following pests is QNAP 2 COPPER NAPHTHENATE RTU specifically designed to protect wood against?

• Termites, wood-destroying beetles, and carpenter ants ✓
• Spiders, scorpions, and cockroaches
• Fleas, ticks, and bed bugs
• Mosquitoes, flies, and wasps

Answer: The label states the product is designed to protect wood against decay, termites, wood-destroying beetles, and carpenter ants.

🔗 Source

When applying QNAP 2 COPPER NAPHTHENATE RTU to non-pressure treated wood, what method should be used?

• A brush or roller ✓
• A high-pressure sprayer
• A drenching hose
• A fine mist aerosol

Answer: The label instructions specify to use a brush or roller when applying to non-pressure treated wood.

🔗 Source