Palisade EC

What is the primary purpose of using Palisade EC on grasses grown for seed and cereals?

• To increase the height of the plant.
• To kill weeds in the wheat field.
• To shorten internodes to reduce lodging. ✓
• To increase the amount of grain produced.

Answer: The description states: 'It is designed to shorten the internodes in grasses grown for seed and cereals, which helps reduce lodging.'

🔗 Source

What is the concentration of the active ingredient Trinexapac-ethyl in Palisade EC?

• 1 pound per gallon
• 12.0% ✓
• 4%
• 1/2%

Answer: The text states: 'The active ingredient is Trinexapac-ethyl at a concentration of 12.0%.'

🔗 Source

Which of the following is a restriction regarding where this product may NOT be applied?

• To any area where surface water is present. ✓
• To crops grown in greenhouses.
• To areas with high wind speeds.
• To any field containing rye.

Answer: The label states: 'Do not apply to areas where surface water is present or to intertidal areas below the mean high water mark.'

🔗 Source

Under which weather condition is application of this product prohibited?

• When wind speeds exceed 10 mph.
• In calm weather when rain is not predicted for the next 24 hours. ✓
• During high humidity levels.
• When temperatures exceed 90 degrees Fahrenheit.

Answer: The label states: 'Do not apply in calm weather when rain is not predicted for the next 24 hours.'

🔗 Source

What is the maximum recommended height for a nozzle above the crop canopy during ground applications?

• 2 feet
• 4 feet ✓
• 6 feet
• 8 feet

Answer: The label states: 'Do not apply with a nozzle greater than 4 feet above the crop canopy.'

🔗 Source

In the event of accidental ingestion, what instruction is provided regarding inducing vomiting?

• Induce vomiting immediately.
• Do not induce vomiting unless told to do so by a poison control center. ✓
• Do not induce vomiting under any circumstances.
• Induce vomiting only if the person is conscious.

Answer: The label states: 'If swallowed, do not induce vomiting unless told to do so by a poison control center.'

🔗 Source

When mixing Palisade EC alone, what is the correct procedure for adding water and product to the tank?

• Add the product first, then add 1/2 to 2/3 of the water, and finally add the remaining water.
• Add 1/2 to 2/3 of the required amount of water, add the product, and then add the remaining water while continuing agitation. ✓
• Fill the tank halfway with water, add the product, and then fill the rest of the tank with water.
• Add all the water first, then add the product and agitate.

Answer: The label states: 'For Palisade EC alone (no tank mix), add 1/2 to 2/3 of the required amount of water to the spray or mixing tank, add the product, and then add the remaining water while continuing agitation.'

🔗 Source

Which of the following is a required piece of personal protective equipment when handling this product?

• Nitrile gloves
• Chemical-resistant gloves such as barrier laminate or Viton™ ✓
• Rubber boots
• Full-face respirator

Answer: The PPE section specifies: 'Chemical-resistant gloves (barrier laminate or Viton™)'.

🔗 Source