NyGuard EZ1 IGR Aerosol

What is the application rate for treating indoor general surfaces (including broadcast, spot, and crack and crevice) for fleas?

• 1 fl. oz. per 1,500 sq. ft.
• 1 fl. oz. diluted in sufficient volume of water per 1,000 sq. ft. ✓
• 1 gallon per 1,000 sq. ft.
• 1 fl. oz. per gallon of water per 1,500 sq. ft.

Answer: For general surface application, the label specifies 1 fl. oz. of concentrate diluted in sufficient volume of water per 1,000 sq. ft.

🔗 Source

According to the label, what must be done when applying the product to kennels and doghouses?

• Apply only to animal bedding
• Remove animals before spraying and do not return them until the spray has dried completely ✓
• Mix with a heat-extracting carpet shampoo
• Apply only to the floor and walls

Answer: The label instructions for kennels and doghouses state to remove animals before spraying and not return them until the spray has dried completely.

🔗 Source

When treating indoor general surfaces for fleas, what is the recommended dilution rate for NyGuard EZ1 IGR Concentrate?

• 1 fl. oz. per gallon of water ✓
• 1 fl. oz. per 1,500 sq. ft.
• 1 gallon per 1 fl. oz. of water
• 1 fl. oz. per gallon of shampoo

Answer: The label states to use 1 fl. oz. NyGuard EZ1 IGR Concentrate per gallon of water for indoor general surface flea applications.

🔗 Source

What is the required reapplication frequency for exterior (outdoor) applications?

• Every 7 days
• Every 14 days
• Every 21 days ✓
• Every 30 days

Answer: The label states to reapply exterior applications every 21 days.

🔗 Source

Which of the following is a stated restriction regarding contact with treated surfaces?

• Do not apply to furniture or upholstery
• Do not allow children or pets to contact treated surfaces until spray has dried ✓
• Do not use in areas with pet sleeping areas
• Do not use in conjunction with any liquid shampoo

Answer: The restrictions section states: 'Do not allow children or pets to contact treated surfaces until spray has dried.'

🔗 Source

When using NyGuard EZ1 IGR in conjunction with carpet shampoo, how should the mixture be prepared?

• Add 1 fl. oz. of concentrate per gallon of water used to dilute the shampoo
• Add 1 fl. oz. of concentrate per gallon of diluted shampoo ✓
• Mix 1 gallon of concentrate with 1,500 sq. ft. of shampoo
• Mix concentrate directly into the shampoo bottle before adding water

Answer: The label specifies adding 1 fl. oz. of NyGuard EZ1 IGR Concentrate per gallon of diluted shampoo.

🔗 Source

When mixing the concentrate for indoor flea treatment, what is the correct procedure?

• Fill the container with water, add concentrate, agitate, and fill to final volume ✓
• Mix the concentrate with shampoo first, then add water
• Add water to the concentrate to prevent foaming
• Mix the concentrate with an adulticide before adding water

Answer: The mixing instructions state to partially fill the container with water, add the concentrate, agitate, and fill to final volume.

🔗 Source

To provide immediate control of adult fleas and flea pupae, how should NyGuard EZ1 IGR be used indoors?

• In conjunction with an adulticide ✓
• By itself as a standalone treatment
• Only in conjunction with carpet shampoo
• By applying it to outdoor surfaces only

Answer: The label notes to use the product in conjunction with an adulticide to provide immediate control of adult fleas and flea pupae.

🔗 Source