Practice 16 Fuse Termiticide exam questions with instant feedback and cited explanations.
Where should Fuse Termiticide be applied for a soil treatment?
Answer: The label specifies that the soil treatment application for termites is for 'Outdoor' locations.
Regarding subterranean termites, how should Fuse Termiticide be used?
Answer: The label states the product is to be used to supplement soil applied termiticides, termite bait systems, or other products registered as the sole source for termite control.
Which of the following pests is Fuse Termiticide specifically listed to control?
Answer: The label explicitly lists wood-boring beetles as a target pest.
What is the minimum distance required when applying the product near estuarine bodies of water?
Answer: The label prohibits application within 60 ft of estuarine bodies of water.
To achieve a finished strength of 0.067% using 100 gallons of water, how much Fuse Termiticide is required?
Answer: The mixing instructions specify 27.5 fl. oz. per 100 gallons of water for a 0.067% finished strength.
When treating a concrete slab-on-ground or basement where the fill under the slab is gravel or other coarse aggregate, what is the required application rate?
Answer: The label states that if fill under slab is gravel or other coarse aggregate, apply at the rate of 1.5 gallons or sufficient volume of solution to cover 10 square feet.
To achieve a finished strength of 0.13% using 1 gallon of water, how much Fuse Termiticide should be mixed?
Answer: The mixing instructions state that 0.6 fl. oz. per 1 gallon of water results in a 0.13% finished strength.
According to the label, what is the target pest for Fuse Termiticide?
Answer: The label facts explicitly list 'termite' as the target pest for all applications.