Practice 8 Dominion 2L Termiticide exam questions with instant feedback and cited explanations.
According to the label, what is the target pest for Dominion 2L Termiticide?
Answer: The label facts explicitly list termites as the target pest.
For 'In-Line Injection' to achieve a 0.1% finished strength, what is the required amount?
Answer: The label specifies 0.6 fl oz/gal for In-Line Injection at a 0.1% finished strength.
Which of the following is a stated restriction regarding the application of this product prior to the installation of finished grade?
Answer: The label restricts applying at a lower dosage or concentration than specified for application prior to installation of finished grade.
What is the required application rate for 'critical areas' (such as along the inside of foundation walls or around plumbing) per 10 linear feet?
Answer: For critical areas, the label specifies a rate of 4 gallons of solution per 10 linear feet.
When applying to a concrete slab-on-ground where the fill under the slab is gravel or other coarse aggregate, what is the required application rate?
Answer: The label states that if fill under slab is gravel or coarse aggregate, apply at the rate of 1.5 gallons to cover 10 square feet.
When using the 55 fl oz size to create a 0.1% finished strength solution, how much product should be mixed per 1 gallon of water?
Answer: For the 55 fl oz size, the label specifies 0.6 fl oz per 1 gallon of water for a 0.1% finished strength.
Regarding contaminated areas of a structure, what does the label instruct?
Answer: The label states not to allow people or pets to contact or reoccupy contaminated areas until cleanup is completed.
When using the 240 mL size to create a 0.05% finished strength solution, how much product is required for 1 gallon of water?
Answer: For the 240 mL size, the label specifies 8 mL per 1 gallon of water for a 0.05% finished strength.