Axxe

Under which weather condition is it prohibited to apply Axxe?

• If rain is expected within 2 hours of application ✓
• If temperatures are between 70°F and 80°F
• If there is light humidity in the air
• If the application occurs during the early morning

Answer: The label explicitly states: 'Do not apply if rain is expected within 2 hours of application.'

🔗 Source

When applying Axxe, what should a technician do to ensure the best results?

• Ensure thorough coverage of plant foliage ✓
• Apply only to the soil around the base of the plant
• Apply only during high wind conditions to increase spread
• Mix with oil to increase systemic movement

Answer: The label states: 'For best results, ensure thorough coverage of plant foliage.'

🔗 Source

What is the required finished strength range for Axxe when diluted for general weed control?

• 6% to 32.5% VV ✓
• 40% to 82% VV
• 2% to 10% VV
• 15% to 40% VV

Answer: The mixing section specifies a finished strength of 6% to 32.5% VV.

🔗 Source

Which set of Personal Protective Equipment (PPE) is required when using Axxe?

• Long-sleeved shirts, long pants, chemical-resistant gloves, and protective eyewear ✓
• Short-sleeved shirts, shorts, and rubber boots
• Full-body Tyvek suit and a respirator
• Chemical-resistant gloves and a face shield only

Answer: The PPE section requires long-sleeved shirts, long pants, chemical-resistant gloves, and protective eyewear.

🔗 Source

What is the re-entry interval (REI) for Axxe?

• 4 hours ✓
• 12 hours
• 24 hours
• 48 hours

Answer: The label specifies a re-entry interval (rei_hours) of 4.

🔗 Source

What is the maximum temperature allowed for an Axxe application?

• 82°F ✓
• 75°F
• 85°F
• 90°F

Answer: The label states do not apply if temperatures exceed 82°F.

🔗 Source

Which of the following best describes the action and selectivity of Axxe?

• A contact, non-selective herbicide that kills any plant material it touches ✓
• A systemic, selective herbicide that only targets broadleaf weeds
• A contact herbicide that only kills annual weeds and leaves perennials intact
• A systemic, non-selective herbicide that travels through the plant roots

Answer: The label states Axxe is a contact, non-selective herbicide that will damage or kill any plant material it contacts.

🔗 Source

According to the label, which of these is a permitted site for Axxe application?

• Walkways and gravel areas ✓
• Only inside residential greenhouses
• Only in agricultural corn and soy fields
• Only on non-vegetated industrial surfaces

Answer: The label lists walkways and gravel areas as examples of industrial/residential sites where the product can be applied.

🔗 Source