Altriset 2026 03 22

Which of the following pests is Altriset 2026 03 22 specifically labeled to control?

• Subterranean termites ✓
• Ants and cockroaches
• Bed bugs
• Fleas and ticks

Answer: The label facts list subterranean termites, drywood termites, and termites as target pests.

🔗 Source

What is the purpose of using Altriset 2026 03 22 in a post-construction setting?

• Remedial control or preventive termite protection ✓
• Only for localized drywood termite infestations
• To treat moisture problems in wood
• To eliminate direct wood-to-soil contact

Answer: The label states that for post-construction, it can be used for remedial control or preventive termite protection.

🔗 Source

To achieve maximum effectiveness against subterranean termites in structures, what must the technician do?

• Correct conducive conditions like moisture problems and direct wood-to-soil contact ✓
• Apply the product at the highest possible concentration
• Apply the product only during dry weather
• Use the product only on non-structural items like firewood

Answer: The label notes that Altriset may not be completely effective unless conducive conditions like moisture problems and direct wood-to-soil contact are corrected.

🔗 Source

When treating structures for subterranean termites, what is the required dilution range?

• 0.05%-0.1% ✓
• 0.1%-0.5%
• 1.0%-2.0%
• 0.01%-0.05%

Answer: The label specifies a dilution of 0.05%-0.1% for subterranean termite applications in structures.

🔗 Source

For a 50-gallon application, how much product is needed to reach a 0.1% finished strength?

• 34 fl oz or 2 pt 2 oz (1 L) ✓
• 17 fl oz or 1 pt 1 oz (500 mL)
• 68 fl oz or 4 pt 4 oz (2 L)
• 34 fl oz or 2 pt 2 oz (1 L)

Answer: The mixing table states that 34 fl oz or 2 pt 2 oz (1 L) per 50 gallons produces a 0.1% finished strength.

🔗 Source

How much Altriset 2026 03 22 should be mixed with 1 gallon of water to achieve a finished strength of 0.1%?

• 0.68 fl oz (20 mL) ✓
• 0.34 fl oz (10 mL)
• 1.0 fl oz (30 mL)
• 2.0 fl oz (60 mL)

Answer: According to the mixing instructions, 0.68 fl oz (20 mL) per 1 gallon results in a 0.1% finished strength.

🔗 Source

If a technician needs to prepare 100 gallons of a 0.05% solution, what amount of product is required?

• 34 fl oz (1 L) ✓
• 68 fl oz (2 L)
• 17 fl oz (500 mL)
• 8.5 fl oz (250 mL)

Answer: The mixing instructions specify 34 fl oz (1 L) per 100 gallons for a 0.05% finished strength.

🔗 Source

Altriset 2026 03 22 can be used on non-structural sites. Which of the following is an example of a non-structural site listed?

• Posts, poles, trees, and firewood ✓
• Building foundations
• Pre-construction soil
• Post-construction structures

Answer: The label identifies non-structural sites as posts, poles, trees, and firewood.

🔗 Source