Agenda SC 2026 03 22

For pre-construction vertical treated zones along foundation walls and pillars, what is the minimum required finished dilution volume?

• 1.0 to 1.5 gallons per 10 square feet
• 2 gallons per 10 linear feet per foot of depth ✓
• 4 gallons per 10 linear feet per foot of depth
• 0.06 gallons per 10 linear feet

Answer: The restrictions state: 'DO NOT apply at a LOWER finished dilution volume than 2 gallons per 10 linear feet per foot of depth for vertical treated zones...'

🔗 Source

When dealing with severe termite infestations, problem soils, or problem construction types, what is the required dilution range?

• 0.03% to 0.05%
• 0.06% only
• 0.09% or 0.125% ✓
• 0.25% or higher

Answer: For severe infestations, problem soils, or problem construction types, the label specifies a dilution of 0.09% or 0.125%.

🔗 Source

Which of the following is a strict usage restriction regarding concentration?

• DO NOT apply at a concentration less than 0.06%. ✓
• DO NOT apply at a concentration higher than 0.125%.
• DO NOT apply in areas with high humidity.
• DO NOT apply more than twice per year.

Answer: The restrictions explicitly state: 'DO NOT apply at a concentration less than 0.06%.'

🔗 Source

What is the application rate for pre-construction horizontal treated zones (concrete slabs on ground or in basements)?

• 1.0 to 1.5 gallons per 10 square feet ✓
• 2 gallons per 10 linear feet per foot of depth
• 4 gallons per 10 linear feet per foot of depth
• 0.06 gallons per 10 square feet

Answer: The label states the rate for concrete slabs on ground or in basements is 1.0 to 1.5 gallons per 10 square feet.

🔗 Source

If you are treating dense soil that will not accept 4 gallons per 10 linear feet per foot of depth, what is the permitted rate and what precaution must be taken?

• Use 1 gallon per 10 linear feet and apply in short bursts.
• Use 2 gallons per 10 linear feet per foot of depth and maintain a continuous treatment zone. ✓
• Use 4 gallons per 10 linear feet and add more water to increase volume.
• Use 0.06% dilution and skip the depth measurement.

Answer: For dense soil, the rate is 2 gallons per 10 linear feet per foot of depth, and the notes specify to be careful to maintain a continuous treatment zone.

🔗 Source

Which of the following target pests is specifically listed for treatment with Agenda SC 2026 03 22?

• Subterranean termites (including Reticulitermes, Zootermopsis, Heterotermes, and Coptotermes) ✓
• American cockroaches and German cockroaches
• Ant species including Fire Ants and Carpenter Ants
• Fleas and ticks in residential lawns

Answer: The label facts state the product is for subterranean termites including species of Reticulitermes, Zootermopsis, Heterotermes, and Coptotermes.

🔗 Source

According to the mixing instructions, how much product is needed to create 1 gallon of a 0.06% finished strength solution?

• 0.06 fl oz
• 1.2 fl oz
• 0.8 fl oz ✓
• 19 fl oz

Answer: The mixing table states that for a 0.06% finished strength, 0.8 fl oz is required per 1 gallon.

🔗 Source

To prepare 24.75 gallons of a 0.09% finished strength solution, how much product should be used?

• 0.8 fl oz
• 1.2 fl oz ✓
• 1.6 fl oz
• 19 fl oz

Answer: The mixing table specifies 1.2 fl oz for 24.75 gallons to achieve a 0.09% finished strength.

🔗 Source